Browsed by
Author: Louise B. Delia

2 Feedwater Tank Design Flaws

2 Feedwater Tank Design Flaws

To ensure your boiler is operating with the highest efficiency, you will need a boiler water treatment plan. This program can’t be established without understanding feedwater setups, and a key factor in understanding them is the impact of deaerator systems. Through these pressurized vessels, a process both preheats and removes the oxygen from the water, limiting corrosion and other detrimental activities to boiler performance. The feedwater tanks heat and store the water, which can be problematic as these operate at atmospheric pressure and don’t contain a deaerating section. A feedwater tank needs to be designed so that it reduces oxygen scavenging and reduces thermal shock. Here are two primary design issues that can occur in a feedwater tank.

1. Poorly Heated Feedwater

The boiled feedwater needs to be heated before it enters the boiler in order to prevent thermal shock. Heating also removes oxygen from the water. Usually, a steam sparger is inside the tank which heats it through steam from the boiler. If you increase the temperature and reduce the oxygen, you reduce the oxygen scavenger requirements as well as the sulfite level. Having an adequate heating supply is the first step in making sure your feedwater is being thoroughly heated.

2. Wrong Cold Water Design

There is a lot of oxygen in the cold water that enters the feedwater tank, and how the make up is fed and where it in the tank it is fed can impact how easy it is for oxygen to dissolve. The make up should be fed between 3-6 inches below the water line, and through a sparger slowly and continuously. Cold water is more dense than heated, and it can sink to the bottom of the tank and head more quickly into the boiler.

Keeping your boiler system in good working condition starts with the way your feedwater tank is designed. Look for ways to keep the water evenly heated and slowly to protect the integrity of the system.…

3 Tips for Cutting Down Waste in Manufacturing Costs

3 Tips for Cutting Down Waste in Manufacturing Costs

When conducting a manufacturing process, cutting costs in one area of the process can mean huge changes in your profit margin. Here are three tips for cutting down on waste in manufacturing costs to become a more profitable business.

Keep Track of the Little Things

One of the best ways for you to cut down on waste is by keeping track of small, disposable products that your company uses a lot of in the manufacturing process. Whether it’s boxes of disposable gloves or a special type of o ring that is essential for your end product, effectively using these items can actually make a big difference in the long run in your overhead cost.

Optimize Efficiency

Another way to decrease overhead costs of manufacturing is by optimizing the efficiency of your production staff. A great way to accomplish this is by consulting with an operations engineer as to where you can cut down production time. Being willing to reverse-engineer your processes or even rearrange your shop floor to become more time-efficient can increase your productivity and decrease your cost waste.

Negotiate Better Supply Costs

When it comes to production costs, sometimes where you need to look is in your accounts payable. By negotiating better prices from suppliers and being willing to trade companies when necessary, you can make your overall cost decrease without reneging on quality. Many suppliers are willing to cut deals in exchange for bulk orders and contracts for future supply, which can end up helping your company come out on top.

As far as overhead costs are concerned, you have quite a few options for cutting down on waste in both material and economic indications. Being willing to change how your company works in the manufacturing process, inventory organization, and supplier negotiations can make a big difference on your bottom line.…

Ways to Improve Engine Life

Ways to Improve Engine Life

Although the type of vehicle you drive is sometimes seen as a status symbol, the primary reason people gave cars is for transportation. For those with fancy cars and high performance, it might be no sweat taking a trip down to the mechanic for routine maintenance. For anyone else who struggles to make ends meet, it can be devastating to have your engine quit and find a tow truck hailing your car down to a power transmission Fort Worth TX repair shop. To help improve your vehicle’s performance and to address problems early on, try these two simple maintenance tips.

1. Change the Air Filter

This is an inexpensive item that you can do on your own, although the techs at the oil changing station will be able to do it for you. Replacing it yourself is much cheaper. You should change it every 12,000 or 12 months, whichever comes first. You will find the filter under the hood in a black rectangular box, Removed the metal side clips to open the casing, and notice how the filter slides in and sits. Exchange the new one for the old, close the closing, and secure the metal clips. Improved air intake improves gas mileage but overall engine performance as well.

2. Change the Oil and Oil Filter

The old standards for oil changes were around every 3,000 miles, but newer vehicles are able to last until around 5,000 before needing to be changed. You can take your vehicle almost anywhere to get the oil changed, and it a reasonable starting cost is about $50. You can do it yourself with some car jacks, rather or oil filter wrench, funnel, and a drip pan.

Some of the simplest things can help increase your car’s ability to stay on the road and avoid the mechanic’s. YouTube and other online sites can be useful references in learning ways to DIY maintenance.…

Using Naturally Sustainable Building Materials In Your New Home Or Addition

Using Naturally Sustainable Building Materials In Your New Home Or Addition

Green energy is something everyone wants to use, but there are not many sources available as of yet. There are some ideas in the following article, however, to help you use green energy in your home. Use this information to educate yourself about energy sources and better ways to care for the environment.

Speak with your utility company about receiving your electric power from a renewable source. Many metropolitan areas get some of their power from hydroelectric, geothermal, solar, or wind powered plants. Often, the electric company can simply apply a certain amount of your electric bill to renewable energy without you needing to make any other changes.

While it is a great idea to turn off your computer when you are not using it, it can be a waste of energy if you do it while you will only be away from it or short periods of time. It is best to wait until before you go to bed when you know there will be hours before you use it again.

Find out about the various energy sources that are available in your local community. Find out what the cost of using these utilities to run your home would be. For example, you might see a savings if you switch from electricity to natural gas, or even switch from electricity to solar or wind power.

Set your computer so that it goes to sleep when you are not using it for more than 10-15 minutes at any given time. While most people believe that screensavers save energy they do not, and should not be used as an alternative to placing your computer in a sleeping state.

You should never use a small amount of warm water all at once. Doing this will just gradually increase your overall energy usage. Instead, try using all the warm water you plan on using immediately. For example, you should try having all your family members take a quick shower at once.

A helpful tip to live greener and conserve energy is to have the windows in your home tinted. The windows in your home act like glass in a greenhouse and when you want you home to be cool, the windows will heat it up and work against your air conditioner and cost you a bundle.

When putting in a new solar energy system, the batteries that store the power should be kept really close together to the cells. This way, you won’t lose power in the cable. This can reduce chances of cables shading cells and reducing capabilities.

Use rechargeable batteries. While they might cost a little bit more initially, they will save you a lot of money in the long run. Rechargeable batteries can be used hundreds of times, and they only need to be replaced about every five years. Another benefit is that you aren’t constantly adding corrosive batteries to the landfill.

There are no easy answers to the energy problems of today’s society, but learning everything possible about energy sources is a good place to start. The more people understand various energy sources, the better changes can be made. The tips above will help you understand energy sources and the most efficient ways to use them.…

A Guide to Purchasing SHIPCO Boiler Feed Units

A Guide to Purchasing SHIPCO Boiler Feed Units

                Purchasing a new system for heating the water isn’t easy, and in a fact, if you are not living alone, or if you are in need of a larger amount of water, you are supposed to move towards seeking for a solution that will work the best. This means that you will be able to have a lot of water heated during the day, and yet, not be in need of spending tons of money for making it happen. This will be very important when choosing the most perfect solution that will be available on the market because by selecting this aspect of the criteria, you will be able to seek for an optimal solution that will work for you on the long run.

                Also, when choosing a solution, it is now of a huge importance to be aware about the procedure by which the water is being heated because nowadays, most of the water heater solutions will be working by collecting the sunlight and using it for heating the water. In the following paragraphs you will be able to find more information about those options and it will all help you determine the amount of money that should be invested, all together with the number of water liters that is supposed to be heated during the daylight or the evening. And if you want to learn more on energy efficiency, please visit http://www.citygreen.ca/benefits-energy-efficiency.

Create a budget

               This will be the first step for you, and it is true that it is the most important one, because by that you aren’t going to be able to find out which solution will be working for you and which one won’t be an option. When creating the budget, you are supposed to be well familiar with the price of those water heater, or moreover, to have an average knowledge about the objective sum total of the price for such solution. This means that once you are able to know how much money you are able to spend on such solution – you will be able to seek for an option according to the particular price range.

              But keep in mind that some of those water heating solution won’t come with an installation procedure that will be free of charge. Also, if you are going to purchase a water heater that is working on a more complex way than the regular one that will be present in your bathroom, you should purchase a better solution all together with the materials used for the installing procedure. And if you aren’t skilled enough when it is a matter of creating the budget, you can always click here and choose to use this guide as a help when calculating the average amount.

              Most of the people aren’t paying attention to this, and often, they are being shocked once the price grows after the heater has been purchased.

Calculating the cost

               But also, you must consider the fact that if you purchase a water heater that works via collecting the sunlight, you won’t be in need of paying additional money for electricity bills. This means that even though such solution might cost you a bit more in the beginning, not paying for electricity during each month will save you a lot of additional funds, and with it, it will make it as it was free when you go through the calculations when looking at the bigger pictures.

Find a quality provider

              Last but not least, when purchasing the SHIPCO boiler feed units, always make sure that you are working with a team of professionals. Doing such will save you a lot of money and it will help you make sure that the solution found will serve you good on the long run, without the need of paying a lot when it a matter of performing some changes, or improving the quality of the boiler or the materials used. If you purchase the solution from a company that has followed some recent quality criteria, you will no longer struggle with any issue linked with the options that are connected. By this you will save plenty of money and time, and the solution will last.

Get Help Moving Your Business

Get Help Moving Your Business

Moving to new facilities can be exciting, especially if you are doing so because your business is growing and you’re ready to take on new challenges. When you need to change your operation over like that, all the excitement can’t hide the fact that the task will be huge, or that your equipment will be at risk until it finds its way to a new home. Luckily, you don’t have to do everything yourself. Professionals moving equipment Los Angeles are available to help, and their expertise is in the logistical problems surrounding the movement and re-installation of heavy equipment.

Let Your Workforce Focus on Their Work

Equipment transportation is an art on its own, and the challenges that come when you move heavy machinery are unique. That’s why your technicians, machine operators, and other specialists should focus on what they do best, operating the equipment when it’s in place. They’ll help get everything ready and they will be there to configure it, but everything in between can be outsourced to people who do it every day, so your employees only have to manage the risks they expect in the regular course of their duties. That comes with the advantages of a shorter, simpler process, but it does more than that. It relieves your workforce of a burden that could cause stress and increase the time it takes them to get up to speed on their projects in their new home.

Make Your Move

You’re going to have a lot to handle as you move, because you need to have utilities in place, notify customers, and make the physical change-over. It’s vital that you have the support you need to stick to your projected timeline, or you’ll wind up missing deadlines for your clients and costing your business money with every missed day of production. That’s why it’s not just good risk management to outsource your move to professionals, it’s also probably going to save you money.…

What You Should Know About Vacuum Pumps

What You Should Know About Vacuum Pumps

Vacuum pumps are devices which use a variety of methods to remove air and gas particles from an enclosed container. This can help create a vacuum needed to manufacture electronics, to freeze dry food items and even to safely package some materials. Before you purchase a pump, it is a good idea to know what types there are as well as what they are used for so you can be sure to get the right one for your needs.

What Types Are There?

Not only are there different makes and models of pumps, there are different types as well. You can find busch vacuum pumps for almost any purpose which run by positive displacement, momentum transfer or entrapment. With positive displacement pumps, you are expanding a compartment, sealing it off and then exhausting it. A momentum transfer pump works by moving sections transferring momentum to the particles along a directed path, effectively pushing them out. This is often seen working in conjunction with a positive displacement pump. An entrapment pump can use cold temperatures to condense the gas, chemicals which can form solids with and around the gas particles, or electrical fields to ionize particles and attract them out of the space.

What Are They Used For?

There are a couple of places in your home where vacuum pumps can be used as well as many industrial applications. You are most likely to encounter home vacuum pumps in food preparation and storage such as freeze dryers and home units designed to seal food into a vacuumed plastic bag. This can help keep harmful bacteria from growing on and spoiling your food items before you can eat them because those bacteria need air to flourish.

Vacuum pumps can be used all over your home or worksite to preserve food, manufacture electronics and much more. To find the right one for your needs you will need to consider the type of pump and the application.…

Sewer Smoke Testing

Sewer Smoke Testing

It’s not an uncommon sight in large cities: smoke oozing from sewer drains in the streets as people walk by, undeterred. Some people may not think twice about the smog-like occurrence, but others might wonder why this happens. Does it indicate a problem in the sewer system? It actually can be just the opposite. A plumbing smoke test is actually a way to check for leaks in a sewer system.

What is It?

In a smoke test, a non-toxic, artificial smoke is pumped through the system in an effort to determine if there are any leaks. If there are any leaks in the system, plumes of smoke will form in these areas as they escape their confinement. This can be used to determine where sewer gas may be escaping from the pipes and potentially harming residents. This gas can sometimes have traces of the explosive methane gas or the deadly hydrogen sulfide gas. Although this test can be performed on a new building, it is usually reserved for buildings that have constant problems with the sewage system and suspect leaks might be the issue.

What is the Process?

When a city performs a smoke test on sewers there is a distinct process they often use as not to alarm residents. First they will identify the areas they need to test and then they will place notices on residents’ doors including the date they will perform the smoke test. Once they begin pumping in the smoke, they will look for smoke coming from the roof vents on homes, which shows the house is adequately connected to the sewer system. If smoke appears inside the home, however, this can indicate a leak somewhere in the system and people are advised to contact their plumber to perform further tests. Common defects range from broken caps to faulty oil rings on toilets.…